1、挤塑板涂刷界面砂浆的配制 1. Preparation of the mortar for the interface of the extrusion plate 挤塑板厂家的挤塑板涂刷界面剂:50kg/桶 塑料桶包装,以用滚子或刷子方便滚刷为宜。 plastic plate manufacturer's extruded plate brush interface agent: 50kg/ barrel plastic barrel packaging, in order to use roller or brush to facilitate the roll brush. 2、挤塑板粘结砂浆的配制 2. Preparation of extruded board bonded mortar 聚合物砂浆和水按100:22~25 kg重量比用砂浆搅拌机或手提搅拌器搅拌均匀。配制挤塑板粘结砂浆加料次序,应先加入聚合物砂浆,后再加入水继续搅拌3min倒出。挤塑板粘结砂浆不得任意加水,应在2h内用完。 Polymer mortar and water are evenly stirred with a mortar mixer or a portable agitator according to the weight ratio of 100:22 to 25 kg. In addition, the polymer mortar should be added first, then water is added to the mortar to continue to stir 3min. The adhesive mortar of the extruded board shall not be added at any water. It shall be used in 2H. 3、抗裂水泥砂浆的配制 3. Preparation of anti cracking cement mortar 聚合物抗裂砂浆:水按100:22~25 kg重量比用砂浆搅拌机或手提搅拌器搅拌均匀。配制抗裂砂浆加料次序,应先加入聚合物抗裂砂浆,然后再加入水继续搅拌3min倒出。抗裂砂浆不得任意加水,应在2h内用完。 Polymer anti cracking mortar: water is evenly stirred with a mortar mixer or a portable agitator according to the weight of 100:22 to 25 kg. In order to prepare the anti cracking mortar feeding order, the polymer anti cracking mortar should be added first, then water is added to continue to stir 3min and pour out. The anti cracking mortar shall not be added at any water. It should be used in 2H. 山东非凡新型建材有限公司 联系人:高经理 邮箱: 285132697@ Q 地址:山东省济南市黄河大厦4楼 网址/ 鲁商云 诺商商道系统,-专业互联网应用服务提供商:/ 诺商商道系统,-专业互联网应用服务提供商:/ 诺商基于多年的优化经验和品牌基础推出的诺商商道系统,诺商信息您身边的互联网*!