企业信息

    山东非凡新型建材有限公司

  • 8
  • 公司认证: 营业执照已认证
  • 企业性质:私营企业
    成立时间:2015
  • 公司地址: 山东省 济南 历下区 解放路街道 山东省济南市历下区解放路30号东源大厦1802室
  • 姓名: 刘相敏
  • 认证: 手机未认证 身份证未认证 微信未绑定

    供应分类

    山东较大的轻质节能隔墙板厂

  • 所属行业:建材 保温/隔热材料
  • 发布日期:2018-04-14
  • 阅读量:235
  • 价格:面议
  • 产品规格:不限
  • 产品数量:不限
  • 包装说明:不限
  • 发货地址:山东济南历下区解放路街道  
  • 关键词:山东轻质隔墙生产基地,山东的轻质隔墙生产基地

    山东较大的轻质节能隔墙板厂详细内容

    一、对施工人员进行培训和技术交底
    1. Training and technical foundation for the builders
    
    我们都知道新型轻质隔墙板产品不同于传统的墙体材料,部分传统施工人员还没有更新或者掌握足够多的安装经验,轻质隔墙板厂家有义务对企业相关项目的技术负责人进行业务交底和技术培训,只有这样方能把轻质隔墙板的有点发挥到,提高轻质隔墙板项目整体的安装效果。
    We all know that the new lightweight partition board products are different from the traditional wall materials. Some traditional builders have not yet updated or mastered enough installation experience. The light partition board manufacturers are obliged to carry out business basis and technical training to the technical leaders of the enterprise related projects. Only in this way, the lightweight partition board can be used. It has played a little role in improving the overall installation effect of light partition wall project.
    
    二、注意作业条件
    Two. Pay attention to the operating conditions
    1、地面应清理干净,表面无浮灰,墙面应弹出+50线和竖向控制线。屋面防水层和主体结构,经验收合格后,方可进行内隔墙安装。
    1, the ground should be clean, no dust from the surface, the wall should pop up the +50 line and the vertical line of control. The roof waterproof layer and main structure can be installed inside the partition wall after acceptance.
    2、地面应弹好门、窗洞口线及边线。
    2, the ground should play good door and window opening line and line.
    3、操作地点环境温度不低于5℃。
    3. The ambient temperature of the operating place is not less than 5.
    4、正式安装前,应试安装样板墙一道,经各方验收合格后再安装。
    4, before the formal installation, we should install the sample wall together and install it after acceptance.
    
    三、严格按照施工方案进行施工
    Three. Carry out construction in strict accordance with the construction plan
    1、根据安装要求,用测量工具标出产品的安装位置,并在该位置安置上下固定件。
    1, according to the installation requirements, use the measuring tool to mark the installation location of the product, and place the upper and lower fixings in this position.
    2、将产品推入上下固定件的凹槽内并**紧,墙板竖起时用力挤紧就位,随即在墙板**头部**紧。
    2, push the product into the groove of the upper and lower fixed parts and tighten it up. When the wall plate is upright, it must be squeezed tightly to the position, then it will be tightly attached to the top of the wall panel.
    3、按如上安装方法依次安装,整体墙面成型。
    3, install according to the above installation method, and form the whole wall surface.
    4、如需走线槽,用切割锯在产品上下位置上锯出线槽大小的凹槽,填入线槽后用砂灰找平。
    4, if you need to go through the slot, use the saw to see the groove of the slot on the upper and lower position of the product, fill in the slot, and use the sand and lime to leveling it.
    5、如需安装空调等外挂产品,在安装位置锯出墙面需受力的位置及大小,和普通墙面一样,可用膨胀螺丝等普通方法固定。
    5, such as the need to install air conditioning and other external products, in the installation position saw the position and size of the wall needs to be force, and the ordinary wall, the same as the ordinary methods of expansion can be fixed.
    6、以上安装完毕后,用嵌缝剂找平产品与产品之间的缝隙,并用玻璃纤维网布条粘接,根据要求将成型的墙体刮腻子、装饰。
    6, after the installation is finished, the crevice between the product and the product is leveled with the seams, and the glass fiber mesh cloth strips are used to bond the products. According to the requirements, the formed walls are scraped and putty and decoration.
    
    四、妥善处理墙板裂缝
    Four. Properly handle the cracks of the wall panel
    我们知道轻质隔墙板间缝隙的出现是不可避免的,这取决于它的本身结构,这就要求众多的轻质隔墙板厂家在未来的道路上更加严格的研发出新的优秀品质的轻质隔墙板,然而对于当下的轻质隔墙板,裂缝让其变得不是太**,所以我们在日常轻质隔墙板的施工项目中就更要注意裂缝的处理,一定要注意塞尺和粘合剂的选用和时间把握,只有我们严格按照操作规范,才能更好的提高轻质隔墙板的安装质量。只要严把轻质隔墙板及配套材料的质量,采用合理的施工工艺,就能把轻质墙板墙的裂缝控制解决。
    We know that the appearance of the gap between the lightweight partition board is inevitable, depending on its own structure, which requires many light partition board manufacturers to develop a new and excellent quality lightweight partition board on the road in the future. However, the cracks make it not perfect for the present lightweight wall panels. Therefore, we should pay more attention to the treatment of the cracks in the construction projects of the daily light partition board. We must pay attention to the selection of the tape and adhesive and the time to grasp. Only in accordance with the operation standard, we can better improve the quality of the installation of the lightweight partition board. As long as we strictly control the quality of light partition wall and supporting materials and adopt reasonable construction technology, we can control the cracks of lightweight wall panels.山东非凡新型建材有限公司
    【山东非凡新型建材有限公司】(咨询电话 )坐落于美丽的山东泉城济南,隶属于中国台湾生态保护有限公司于山东的子
    
    公司---莱芜兴鲁建筑节能科技有限公司。
     山东非凡新型建材有限公司拥有★非凡尚品多功能轻质墙板、兴鲁商砼站、自保温切块、水泥发泡保温板、生态预铸块、抗裂砂
    
    浆、粘结砂浆★等产品、并拥有多项**技术。 工厂位于山东省莱芜市莱城区工业园,占地6.8万平方米,拥有8000多平方米的综
    
    合办公区,1.2万平方米的生产车间,   本公司一直致力于保温防火的新型A级外墙保温系列产品的生产研发工作。产品已通过专
    
    业检测机构的认可,并与澳大利亚外商共同研发新型保温材料及先进设备的引进,积极响应国家节能减排号召,对中国建筑事业的
    
    发展做出重大贡献。
    山东非凡新型建材有限公司
    联系人:高经理
    邮箱: 285132697@
    电话:400-009-6717
    手机: 
    Q
    地址:山东省济南市黄河大厦4楼
    网址/
    鲁商云
    诺商商道系统,-专业互联网应用服务提供商:/
    诺商商道系统,-专业互联网应用服务提供商:/
    诺商基于多年的优化经验和品牌基础推出的诺商商道系统,诺商信息您身边的互联网*!

    http://sdffjc.cn.b2b168.com
    欢迎来到山东非凡新型建材有限公司网站, 具体地址是山东省济南历下区山东省济南市历下区解放路30号东源大厦1802室,联系人是刘相敏。 主要经营多功能轻质墙板、兴鲁商砼站、自保温切块、水泥发泡保温板、生态预铸块、抗裂砂浆、粘结砂浆等产品。 单位注册资金单位注册资金人民币 100 万元以下。 我司主要供应:多功能轻质墙板,水泥发泡保温板,自保温切块,兴鲁商砼站,抗裂砂浆等,我们的产品质量优等,种类齐全,销售范围广,我们的服务客户满意;如果您对我公司的产品有兴趣,请在线留言或者来电咨询。